Steel shopfronts in Andover
Steel shopfronts in Andover start from £3,600 plus VAT. Each is made to the measured opening, after a free site survey.
- Guide price, plus VAT
- £3,600 to £11,995
- Lead time
- 5 to 6 weeks after drawing sign-off
How does it work in Andover?
Most shop owners come to us at one of three points: a new lease, a break-in, or a frontage that has finally given up. In each case the first step is a survey, and we cover postcodes including SP10, SP11 and SO20.
What are the guide prices?
| Opening width | Typical unit | Guide price plus VAT |
|---|---|---|
| Up to 3 m | A typical single shop unit | £3,600 to £5,995 |
| 3 to 4 m | A wider single unit | £4,695 to £7,795 |
| 4 to 5 m | A double-fronted or corner unit | £5,895 to £9,695 |
| 5 to 6 m | A large double unit | £7,195 to £11,995 |
Guide prices, not offers. Your written quotation sets the final figure.
What should you check before you decide?
Can it have a shutter later?
Yes, but it is far neater to allow for one now. Tell us at survey, and we will leave height behind the fascia even if the shutter comes later.
Should the stallriser stay?
A stallriser protects the bottom of the glass from kicks, trolleys and cleaning water. On older streets it is also part of the look.
How is the frontage measured?
We measure the structural opening, not the old frame. Lintel condition, floor level and how square the opening is all get recorded at survey.
Will this need planning permission in Andover?
It depends on how much changes. A new layout, new materials or a moved door usually needs permission from Test Valley Borough Council. Illuminated signs can need advertisement consent, depending on size, position and area. Listed buildings need listed building consent as well.
What do people ask about steel shopfronts in Andover?
How soon can you fit a steel shopfront in Andover?
Lead time is 5 to 6 weeks after drawing sign-off. We book the fitting days around your trading.
How much does a steel shopfront cost in Andover?
Guide prices start from £3,600 plus VAT. Size, doors and glass set the final figure after a free site survey.
Can you add a shutter to the new shopfront?
Yes, and it is best planned now. We can price the frontage and shutter as one job.
Is steel stronger than aluminium for a shopfront?
Yes, section for section. It also lets you keep glazing bars slim while holding heavier glass.
Where else do we fit steel shopfronts near Andover?
What else can we do in Andover?
Find out what your frontage will cost in Andover
Answer four quick questions for a guide price, or book a free survey for a firm one.