Vision roller shutters in Tonbridge
Vision roller shutters in Tonbridge start from £2,195 plus VAT, colour matched to your frontage, after a free site survey.
- Guide price, plus VAT
- £2,195 to £5,195
- Lead time
- 2 to 3 weeks after survey
How does it work in Tonbridge?
A frontage in Tonbridge has to suit the street as well as the shop. Tonbridge and Malling Borough Council decides what is acceptable where planning applies, so we draw with that in mind.
What should you think about first?
Do I need a safety edge?
That depends on the risk assessment. Powered shutters near the public are assessed against BS EN 12453, and we quote what the result calls for.
How long does a shutter last?
Curtains and guides can last many years with planned servicing. Motors, springs and locks go first, and a busy shop will wear them faster.
Does a shutter need planning permission?
An external shutter usually does. Many councils resist solid external shutters, and some resist perforated ones too. An internal grille or shutter is usually the safer route, so we can advise what to check before you order.
What are the guide prices?
| Opening width | Typical unit | Guide price plus VAT |
|---|---|---|
| Up to 3 m | A typical single shop unit | £2,195 to £2,895 |
| 3 to 4 m | A wider single unit | £2,795 to £3,595 |
| 4 to 5 m | A double-fronted or corner unit | £3,395 to £4,395 |
| 5 to 6 m | A large double unit | £3,995 to £5,195 |
Guide prices, not offers. Your written quotation sets the final figure.
Will this need planning permission in Tonbridge?
An external shutter normally needs planning permission from Tonbridge and Malling Borough Council. An internal shutter or grille often does not, so it is worth checking before you order. Illuminated signs can need advertisement consent, depending on size, position and area. Listed buildings need listed building consent as well.
What do people ask about vision roller shutters in Tonbridge?
How soon can you fit a vision roller shutter in Tonbridge?
Lead time is 2 to 3 weeks after survey. We agree the fitting day with you.
Can you match the shutter to my shopfront?
Yes. We powder coat to a RAL colour to match your frame as closely as we can.
Do I need planning permission for a shutter in Tonbridge?
An external shutter usually needs it, and Tonbridge and Malling Borough Council decides. Many councils resist solid external shutters, and some resist perforated ones too.
What is a punched-lath shutter?
A shutter with rows of slots cut through the laths, so you can see through it when it is down. Vision shutter is the common trade name.
Where else do we fit vision roller shutters near Tonbridge?
What else can we do in Tonbridge?
Find out what your frontage will cost in Tonbridge
Answer four quick questions for a guide price, or book a free survey for a firm one.