Steel shopfronts in Newport
We survey, make and fit steel shopfronts in Newport, starting with a free site survey. Guide prices start from £3,600 plus VAT.
- Guide price, plus VAT
- £3,600 to £11,995
- Lead time
- 5 to 6 weeks after drawing sign-off
What can you expect in Newport?
A job starts the same way wherever you are: a measured survey, a look at the lintel and floor level, and a conversation about how the unit trades. We cover postcodes including TF10 and ST20, and we also work nearby in Telford and Wellington.
How much will it cost?
| Opening width | Typical unit | Guide price plus VAT |
|---|---|---|
| Up to 3 m | A typical single shop unit | £3,600 to £5,995 |
| 3 to 4 m | A wider single unit | £4,695 to £7,795 |
| 4 to 5 m | A double-fronted or corner unit | £5,895 to £9,695 |
| 5 to 6 m | A large double unit | £7,195 to £11,995 |
Guide prices, not offers. Your written quotation sets the final figure.
What should you check before you decide?
What about the fascia and sign?
We set out the fascia at the same time, so your sign fixings and any shutter box do not clash. Illuminated signs can need advertisement consent, depending on size, position and area.
Can it have a shutter later?
Yes, but it is far neater to allow for one now. Tell us at survey, and we will leave height behind the fascia even if the shutter comes later.
How is the frontage measured?
We measure the structural opening, not the old frame. Lintel condition, floor level and how square the opening is all get recorded at survey.
Will this need planning permission in Newport?
A like-for-like replacement often does not need permission, but a visibly different frontage usually does. The application goes to Telford & Wrekin Council. Illuminated signs can need advertisement consent, depending on size, position and area. Listed buildings need listed building consent as well.
What do people ask about steel shopfronts in Newport?
Does a new shopfront in Newport need planning permission?
A change to how the frontage looks usually does. Telford & Wrekin Council is the council to check with, and we advise at survey.
Do you cover the postcodes around Newport?
Yes, including TF10 and ST20.
How much does a steel shopfront cost in Newport?
Guide prices start from £3,600 plus VAT. Size, doors and glass set the final figure after a free site survey.
Is steel stronger than aluminium for a shopfront?
Yes, section for section. It also lets you keep glazing bars slim while holding heavier glass.
Where else do we fit steel shopfronts near Newport?
What else can we do in Newport?
Find out what your frontage will cost in Newport
Answer four quick questions for a guide price, or book a free survey for a firm one.