Steel shopfronts in Bexhill-on-Sea
Steel shopfronts in Bexhill-on-Sea start from £3,600 plus VAT. Each is made to the measured opening, after a free site survey.
- Guide price, plus VAT
- £3,600 to £11,995
- Lead time
- 5 to 6 weeks after drawing sign-off
How does it work in Bexhill-on-Sea?
A frontage in Bexhill-on-Sea has to suit the street as well as the shop. Rother District Council decides what is acceptable where planning applies, so we draw with that in mind.
What should you check before you decide?
Which colours work best?
Dark greys and black are the most requested because they frame the shop well. In a conservation area, ask us first, as colour can matter to the council.
How is the frontage measured?
We measure the structural opening, not the old frame. Lintel condition, floor level and how square the opening is all get recorded at survey.
What about the fascia and sign?
We set out the fascia at the same time, so your sign fixings and any shutter box do not clash. Illuminated signs can need advertisement consent, depending on size, position and area.
How much will it cost?
| Opening width | Typical unit | Guide price plus VAT |
|---|---|---|
| Up to 3 m | A typical single shop unit | £3,600 to £5,995 |
| 3 to 4 m | A wider single unit | £4,695 to £7,795 |
| 4 to 5 m | A double-fronted or corner unit | £5,895 to £9,695 |
| 5 to 6 m | A large double unit | £7,195 to £11,995 |
Guide prices, not offers. Your written quotation sets the final figure.
Will this need planning permission in Bexhill-on-Sea?
Usually yes, if the look of the frontage changes. Replacing like for like may not need permission, but Rother District Council has the final say. Illuminated signs can need advertisement consent, depending on size, position and area. Listed buildings need listed building consent as well.
What do people ask about steel shopfronts in Bexhill-on-Sea?
Can you add a shutter to the new shopfront?
Yes, and it is best planned now. We can price the frontage and shutter as one job.
Do you cover the postcodes around Bexhill-on-Sea?
Yes, including TN40, TN39 and TN33.
How soon can you fit a steel shopfront in Bexhill-on-Sea?
Lead time is 5 to 6 weeks after drawing sign-off. We book the fitting days around your trading.
Does steel rust?
Not if the finish is right and stays intact. It is galvanised or primed, then powder coated.
Where else do we fit steel shopfronts near Bexhill-on-Sea?
What else can we do in Bexhill-on-Sea?
Find out what your frontage will cost in Bexhill-on-Sea
Answer four quick questions for a guide price, or book a free survey for a firm one.