Electric roller shutters in Renfrew
We supply and fit electric roller shutters in Renfrew, starting with a free site survey. Guide prices start from £1,450 plus VAT.
- Guide price, plus VAT
- £1,450 to £3,995
- Lead time
- 2 to 3 weeks after survey
How does it work in Renfrew?
Whether the unit is on the main shopping street or a local parade in Renfrew, the job is measured the same way, and Renfrewshire Council is the council to check with.
What makes the difference?
Do I need a safety edge?
That depends on the risk assessment. Powered shutters near the public are assessed against BS EN 12453, and we quote what the result calls for.
Steel or aluminium laths?
Steel is stronger and heavier. Aluminium is lighter and quieter, which helps under flats. Most shops are well served by either.
What about a fire exit?
A shutter must never trap people in. If it covers an escape route, it needs to be open while the premises are occupied, or opened easily from inside.
What should you budget?
| Opening width | Typical unit | Guide price plus VAT |
|---|---|---|
| Up to 3 m | A typical single shop unit | £1,450 to £1,995 |
| 3 to 4 m | A wider single unit | £1,895 to £2,595 |
| 4 to 5 m | A double-fronted or corner unit | £2,395 to £3,195 |
| 5 to 6 m | A large double unit | £2,895 to £3,995 |
Guide prices, not offers. Your written quotation sets the final figure.
Will this need planning permission in Renfrew?
Probably, if it is external. Renfrewshire Council decides. Many councils resist solid external shutters, and some resist perforated ones too. In Scotland, work can also need a building warrant before it starts, and listed buildings need listed building consent from the council.
What do people ask about electric roller shutters in Renfrew?
Do I need planning permission for a shutter in Renfrew?
An external shutter usually needs it, and Renfrewshire Council decides. Many councils resist solid external shutters, and some resist perforated ones too.
Can you match the shutter to my shopfront?
Yes. We powder coat to a RAL colour to match your frame as closely as we can.
How soon can you fit an electric roller shutter in Renfrew?
Lead time is 2 to 3 weeks after survey. We agree the fitting day with you.
Does a roller shutter need planning permission?
An external shutter usually does. Rules vary, so check with your council before you order. We can advise what to ask.
Where else do we fit electric roller shutters near Renfrew?
What else can we do in Renfrew?
Find out what your frontage will cost in Renfrew
Answer four quick questions for a guide price, or book a free survey for a firm one.